保护桶和中型散货箱，防止腐蚀、所载物质的质量下降和有害气溶胶逸出。
您是否注意到桶内或中型散货箱内有冷凝液滴，甚至更严重： 生锈、储存介质中有水、污泥沉积以及桶或中型散货箱重新装满后有刺激性气味？原因何在？在释放储存介质和吸入空气以平衡压力时，湿气和污物颗粒不受阻碍地进入料桶或 IBC，再加上加注罐体时逸出的气溶胶。
面对现实吧，如果你不采取任何措施，你将面临昂贵的维护工作，并对员工和环境造成损害。
幸运的是，有一种解决方案：安装 GIEBEL Adsorber®。它可以干燥和清洁供气，防止污染物逃逸，为您节省维护工作和资金。
为什么水和污垢是您最关心的问题？
中型散货箱和桶通常用于储存酯类油等物质，以便在需要时使用。这些油具有很强的吸湿性，也就是说，它们会吸附水分。
在油的饱和点之前，水是以溶解水的形式存在的，肉眼无法看到。在压力或温度波动下，这些水会乳化或形成所谓的游离水。这对润滑系统尤其有害，因为水的不可压缩性会破坏保护轴承的流体动力油膜。结果就是过度磨损。
水还会加速氧化并破坏碳氢链，从而降低机油的耐用性。含有添加剂的机油更容易受到水的污染。添加剂和水反应生成酸性物质，会加剧机械的腐蚀。
因此，要想长期、低成本地储存吸湿性物质，并且不对机器造成损害，防止湿气进入是重中之重。这正是我们的 GIEBEL Adsorbers® 所能做到的！
呼吸干燥器
Breather dryers adsorb humidity and thus prevent water from entering machines.
油雾分离器
Oil mist separators prevent oil aerosols and pollutants from escaping machines.
Breather dryers for barrels & IBC.
D = Disposable
R = Rechargeable
Oil mist separators for barrels & IBC.
D = Disposable
R = Rechargeable
FAQ regarding barrels & IBC.
Malfunctions & troubleshooting
Product quality decreases when moisture, particles, or oxygen enter the barrel or IBC. This accelerates chemical reactions, oxidation, and contamination, especially during long-term storage or frequent dispensing.
What you can do: Install a GIEBEL Adsorber® to filter out moisture and particles from the incoming air and maintain consistent product quality.
Bacteria and fungi, such as diesel bugs, thrive in barrels and IBCs when moisture accumulates inside the container. Even minimal water content creates a breeding ground, especially in fuels and lubricants.
What you can do: Prevent moisture ingress from the start by fitting your container with a GIEBEL Adsorber®. This keeps storage conditions dry and helps avoid microbial growth.
Corrosion forms when internal surfaces of barrels or IBCs are exposed to moisture over time, especially during outdoor storage or temperature shifts. This not only damages the container but can also contaminate the stored product.
What you can do: Use a GIEBEL Adsorber® to block humid air from entering, significantly reducing condensation and protecting both your container and product from corrosion.
Product spoilage during storage is mainly caused by moisture ingress and condensation. When barrels or IBCs breathe during dispensing or due to temperature changes, humid air enters and condenses inside the container. This leads to degradation of oils, fuels, chemicals, and other sensitive materials.
What you can do: Use a GIEBEL Adsorber® instead of standard venting to remove moisture from the intake air and keep your product protected during storage and use.
Barrel & IBC oil & filtration
Shelf life depends on the material stored and exposure to environmental conditions. Moisture ingress drastically reduces storage time. By keeping the air dry, you can significantly extend product usability.
What you can do: Use a GIEBEL Adsorber® to extend shelf life, minimize spoilage, and reduce unnecessary disposal costs.
Typical signs of contamination include a milky or cloudy appearance, phase separation, unusual odors, color changes, or microbial growth. These are often the result of water ingress or particle contamination.
What you can do: Prevent contamination before it starts by fitting a GIEBEL Adsorber®, keeping the air entering your container clean and dry.
Contaminated oils, fuels, or chemicals can damage machinery, clog filters, cause inefficient combustion, or lead to product failures in downstream processes—resulting in higher costs and operational risks.
What you can do: Use a GIEBEL Adsorber® to avoid contamination and safeguard both your stored product and equipment from avoidable damage.
Efficiency & optimization
Stable storage conditions are achieved by preventing moisture and dust ingress. This keeps the product in its original quality, minimizes waste, and reduces rework in your processes.
What you can do: Install a GIEBEL Adsorber® to create clean, dry storage conditions and maximize product reliability.
Spoiled product often results in costly waste disposal or reprocessing. By preventing moisture ingress, you maintain quality, avoid spoilage, and reduce unnecessary product losses.
What you can do: Use a GIEBEL Adsorber® to reduce product spoilage and lower disposal costs over time.
Service & parts
GIEBEL offers various adsorbers designed for different container sizes, storage durations, and product types—whether you store oils, fuels, or chemicals. The choice depends on your specific storage and environmental conditions.
What you can do: Contact GIEBEL or use our product finder to select the most suitable adsorber for your barrels or IBCs.
GIEBEL Adsorbers® can be easily installed using barrel plugs, adapters, or quick connectors. They fit directly onto standard barrel or IBC openings and can be installed within minutes without complex modifications.
What you can do: Choose the right GIEBEL mounting accessories and follow the simple installation steps for immediate protection.
Our adsorbers are equipped with color-changing desiccants that indicate saturation. When the color fully shifts, it’s time to refill or replace the desiccant to maintain effective protection.
What you can do: Monitor the saturation status regularly and replace the drying agent promptly to prevent contamination risks.